Autel Tool Parts – Autel-Tools.com

Newest Original TP Touch Screen for AUTEL MaxiSYS MS906 Auto Diagnostic Scanner Free Shipping

autel-tools — Fri, 07 Mar 2025 02:42:32 +0000

Original TP Touch Screen for AUTEL MaxiSYS MS906 Auto Diagnostic Scanner

This is an original touch screen used for AUTEL MaxiSYS MS906.

Note:

1. Please confirm your MS906 touch screen cannot work any more before your purchase. Better check it with our technicians.
2. You should be able to install the screen yourself, as we cannot offer this tech support for you.
3. No one but yourself should take responsibility if you break something.

Tip: if your touch screen is the same version as this one, please kindly note this step:
when you exchange the touch screen, at the same time, you need to dismantle R375 resistance on the PCB.

Package List:

1pc x Original TP Touch Screen for AUTEL MaxiSYS MS906 Auto Diagnostic Scanner

Mercedes Benz 14Pin Connector for MaxiSys MS908 and MS908P

autel-tools — Fri, 07 Mar 2025 02:42:28 +0000

Mercedes Benz 14Pin Connector for MaxiSys MS908 and MS908P

This not include in the Maxisys 908P and MS908 standard package, need purchase alone.

Package Including:

1pc x Mercedes Benz 14Pin Connector for MaxiSys MS908 and MS908P

100% Original Autel MaxiVideo MV108 8.5mm Digital Inspection Camera for MaxiSys Tablet Kit

autel-tools — Fri, 07 Mar 2025 02:42:27 +0000

Original Autel MaxiVideo MV108 8.5mm Digital Inspection Camera for MaxiSys Tablet Kit

MaxiVideo MV108 8.5mm Digital Inspection Camera Features and Functions:

White LED lights to illuminate the inspection areas

Small diameter allows it to be used in the tight spaces

Powerful and perfect for inspecting most spark plug holes

Super bright LED and high resolution provide crystal clear images
Wonderful for up-close visual inspections in confined areas, such as engine cylinders and small part inspections

What kind of Autel Tablets work with this MaxiVideo MV108 8.5mm / MV105 5.5mm?

It works with the following Autel tablets:

MaxiSys MS906S, MaxiSys MS906TS, MS906BT, MK906BT, MS906 Pro, MS906 Pro-TS, MS908, MS908 Pro, MS908S, MS908S Pro, MK908, MK908P, Maxisys Elite, Elite II, MS909, MS919, and Ultra.

New added Applicable Models as following: MK808/ MK808BT/ MK808TS / MP808/ MP808BT/ MP808TS /MX808/ MX808TS/ DS808/ DS808BT/ DS808K/ DS808TS

MaxiVideo MV108 8.5mm Digital Inspection Camera Connection:Step 1:

Connect the Removable Imager Head Cable to the Handgrip. Make sure the key and slot are properly aligned. Once they are aligned, finger-tighten the knurled knob to hold the connection firmly in place.Step 2:
Power up the MaxiSys Tablet, and select the “Digital Inspection” application on the Job Menu.

Step 3:
Connect the MaxiVideo inspection camera to the MaxiSys Tablet with the USB connection, and that’s it!

MaxiVideo MV108 8.5mm Digital Inspection Camera Specifications:

Optimal Viewing Distance: 1″ to 14″ (2.54cm to 35.56cm)

Image Capture: 640×480

Image Head: 8.5mm (0.33″)

Operating Temperature: Main Unit: 0°C to 50°C (32°F to 122°F)

Cable: -10°C to 70°C (14°F to 158°F)

Storage Temperature: -20°C to 75°C (-4°F to 167°F)

Waterproof: Imager head and cable are waterproof to 3m(10′)

Weight: 0.3kg with 8.5mm diameter imager head

Compliance: FCC (EMC), CE (EMC and LVD)

Package including:

1pc x Magnet

1pc x Mirror

1pc x Hook

Main Test Cable for Autel MaxiSys MS908/Mini MS905/DS808K/DS808/MX808

autel-tools — Fri, 07 Mar 2025 02:42:26 +0000

Main Test Cable for Autel MaxiSys MS908/ Mini MS905/DS808/DS808K/MX808

Package Including:

1pc x Main Test Cable for Autel MaxiSys MS908/Mini MS905/DS808K/DS808/MX808

Main Test Cable For Autel MaxiSys MS908 Pro Maxisys Elite

autel-tools — Fri, 07 Mar 2025 02:42:26 +0000

Main Test Cable For Autel MaxiSys MS908 PRO

It is mainly used to replace the damaged main test cable in the MaxiSys MS908 Pro package.

Paket Liste:

1pc x Main Test Cable For Autel MaxiSys MS908 PRO

Main Test Cable for Autel MaxiIM IM608/ IM608Pro Advanced Key Programming Tool (Stretch-Resistant Cable)

autel-tools — Fri, 07 Mar 2025 02:42:25 +0000

Main Test Cable for Autel MaxiIM IM608 / IM608Pro

Package includes:

1pc x Main Test Cable for Autel MaxiIM IM608/ IM608Pro

GODIAG G-A ECU/TCU Cable for Connecting AUTEL IM608II IM508S G-BOX3 with GT107/ GODIAG ECU GPT

autel-tools — Fri, 07 Mar 2025 02:42:09 +0000

GODIAG G-A ECU/TCU Cable for Connecting AUTEL IM608 II IM508S G-BOX3

GODIAG G-A ECU/TCU cable is used to connect AUTEL IM608 II IM508S G-BOX3 with GT107, GT107+ or GODIAG ECU GPT Boot adapter to read and write data on VAG gearbox ECU and engine ECU, clone ECU.

The Connection Diagram

1. To read DQ250 with Autel IM608 II & GT107+

2. To read DQ200 with Autel IM608 II & GT107+

3.3. To read MED17.5 with Autel IM608 II & GT107+

Supported ECU Models:

Transmission Control Unit (TCU)

DQ200DTC1766, DQ200_G2_PQTC1784, DQ250_MQBTC1766, DQ380, DQ500(Continental)TC1766

Engine

EDC17C46TC1767, EDC17C54TC1797, EDC17C64TC1797, EDC17C74TC1793S, EDC17CP14TC1796, EDC17CP20TC1796. EDC17CP24TC1796, EDC17CP44TC1797, EDC17U01TC1766, EDC17U05TC1796, ME17.1.1TC1797, ME17.1.6TC1797, ME17.5.20TC1767, ME17.5.22TC1724N, ME17.5.24TC1724N, ME17.5.26TC1724N, ME17.5.6TC1767, MED17.1.1TC1797, MED17.1.6TC1797, MED17.5TC1766, MED17.5.1TC1766, MED17.5.2TC1767, MED17.5.20TC1766, MED17.5.21TC1782, MED17.5.25TC1782, MED17.5.5TC1766, MED17.5.5TC1767.

Note: Due to the large number of supported ECU models, it is impossible to list them all. Please go to the software to find more supported ECU models.

Package includes:

1pc x GODIAG G-A ECU/TCU cable

GODIAG GT100 AUTO TOOLS OBD II Break Out Box ECU Connector work with Autel IM608/ MaxiSys Elite

autel-tools — Fri, 07 Mar 2025 02:42:09 +0000

GODIAG GT100 AUTO TOOLS OBD II Break Out Box ECU Connector

GODIAG GT100 is a latest testing platform for OBDII protocol communication detection and ECU maintenance / diagnosis / programming / coding.
It can convert the car OBD2 interface into 16 pin for signal detection and electrical level conversion. Able to connect the single modules or multiple
modules of the vehicle. It can be connected with any diagnostic tool to tell whether the car communication is good or not. It can also supply power to
the car when you change the battery to avoid the vehicle control module data being lost, automatically locked, the key remote control fails and the fault light turns on.

Guarantee: One year warranty.

GODIAG GT100 function and operation guide

– By connecting the vehicle and diagnostic tool via OBDII, Godiag GT100’s LED will indicate whether the OBDII diagnostic interface has a good communication with the car.

– Monitor the voltage of vehicle OBDII interface and display it in real time. If it is less than 11V, please stop the diagnosis and programming to avoid the vehicle being unable to start/data loss/module locked.

Indicator Meaning:

1. Manufacturer custom
2. SJE1850 wire
3. Manufacturer custom
4. Power grounding
5. Signal grounding
6. SAEJ2284《CAN》high
7. ISO9141-2&iso, DIS4230-4K wire
8. Manufacturer custom

9. Manufacturer custom
10. SJE1850 wire《bus->
11. Manufacturer custom
12. Manufacturer custom
13. Manufacturer custom
14. SAEJ2284《CAN》low
15. ISO9141-2 & ISO/DIS 4230-4L wire
16. Car battery positive

1. OBDII Protocol Detector & communication detection

1). Connect GODIAG GT100 to the OBDII diagnostic port of the car.

2). When the device displays the voltage, turn on the power switch of GODIAG GT100.

3). Then connect to the diagnostic tool, when the tool is communicating with the car, the LED indicator of corresponding protocol will light up or flash. ( If the CAN protocol is detected, it will have the maximum brightness. When the communication is successful, the corresponding CAN-H and CAN-L will dim or twinkling weakly)

2. ECU connection: single module connection

GODIAG GT100, connected to a single ECU module, is convenient for a user to do the single-module diagnosis and programming.

1). Connect the ECU with the color jumpers. (If the ECU is CAN protocol, please check whether you will need to connect a 120 ohm resistor.)

2). The Godiag GT100 can be powered by connecting to the OBDII diagnostic interface of car, or by an AC power adapter.

3). To diagnose and program for a single ECU by connecting the diagnostic tool or ECU programmer.

3. Banana plug extension connection:Extend the car’s OBDII 16pin interface to tell you whether the OBDII interface connection is good or not, which is convenient for the test of OBDII interface voltage waveform.

4. Convert OBD1 diagnostic interface to the standard OBD2Use the connector to convert the OBD1 interface into obd2 interface according to the diagnostic interface communication protocol.

5. Connect multiple ECU control modules at the same time, which is convenient for the professional engineers to detect and maintain.

6. When to use the extension cables:
The space of the diagnostic interface location is too narrow to connect to the diagnostic tool, or the user find that the diagnostic cable is not long enough during maintenance. It can be extended by 1.2 meters.

7. Able to power the car when replacing the used battery.

1). Prepare battery A to supply power by connecting to No. 16 / 4 / 5 holes of Godiag GT100 & to the OBD2 diagnostic interface of the car.

[Notice 1. Turn on the power switch of Godiag GT100. 2. Don’t turn on the ignition switch, don’t start the car]

2). Then replace the brand-new battery B with the used battery in the car, which will ensure that the car has fully power to prevent data loss and audio lock-up or the malfunction due to lack of power to the ECU control module.

8. The dedicated adapter will be released (help GT100 connect to the special ECU module)

Hardware Connection Diagram:

Godiag GT100 Parameter

Item	Specification
Diagnostic port	OBDII
Working voltage	DC 9V-24V
Work and power	0.5-0.6W
Adapter power	Input AC100v-240v, Output DC12V 1A
Operating temperature range	-20 to 70 °C ( -4 to 158 °F )
Storage temperature range	-40 to 85 °C ( -40 to 185 °F )
Dimension	L: 23cm, W:18cm, H:7cm

Package includes:

1pc x Host

1pc xOBD 2-in-1 extension cable

1pc xColored jumper cable

1pc xPower supply 12V

1pc xResistance 120 ohm

6pcs xBanana plug

24pcs xWire accessories, Dupont 2.54mm connector female pins

GODIAG CAS2 CAS3 SER Semi Smart Test Platform Detect CAS & Key Synchronization Solder-free Matching CAS Data Read, Write and Program

autel-tools — Fri, 07 Mar 2025 02:42:08 +0000

GODIAG CAS2 CAS3 SER Semi Smart Test Platform

Godiag CAS2 CAS3 SER Semi Smart Test Platform, is a dedicated device developed for BMW locksmiths, maintenance engineers and CAS2 / CAS3,CAS3+ CAS3++ programming engineers. It works with Autel IM608 PRO II to perform all key lost matching or key addition operations. This product is suitable for magnetic semi-intelligent or smart keys.

Note: Godiag CAS2 CAS3 SER Semi Smart Test Platform does not support mechanical key CAS2 and cannot be used with diagnostic equipment or with GT100 GT100+.
When work with Autel IM, it does not support reading and writing, but supports key testing after complete key matching.

Highlights:

1. Detect CAS and key synchronization
2. Solder-free matching CAS2/CAS3 serial smart key
3. CAS data reading, writing and programming
4. All keys lost /adding keys matching
5. CAS key data backup
6. CAS module function judgment

Functions:

1.Check wheteher CAS2 / CAS3, CAS3+ CAS3++ modules and magnetic semi-intelligent/smart keys are synchronized.

2.Cooperate with the key programming devices like Xhorse Key Tool Plus Pad / Xhorse vvdi 2 / bmw vvdi bim tool / Autel im608 / CGDI BMW / Lonsdor devices, OBDSTAR devices, etc., to perform all key lost matching or key addition operations.

3.CAS2 / CAS3, CAS3+ CAS3++ module diagnostics

4.CAS2 / CAS3, CAS3+ CAS3++ module programming

Module and key synchronization detection:

Check whether the CAS2 / CAS3, CAS3+ CAS3++ module and the magnetic semi-intelligent smart key can be synchronized:

Package Includes:

1pc x GODIAG CAS2 CAS3 SER Semi Smart Test Platform
1pc x OBD2 to DB25 Cable

GODIAG ECU GPT Boot AD Programming Adapter Used with J2534 Devices Easy and Convenient

autel-tools — Fri, 07 Mar 2025 02:42:08 +0000

GODIAG ECU GPT Boot AD Programming Adapter Used with J2534 Devices Easy and Convenient

GODIAG ECU GPT Boot AD programming adaptercan help customers read and write ECU data without disassembling the ECU using the OBD2 Bench or GPT Bench method or disassembling the ECU and using the Boot method. This product is equipped with a short-circuit-proof BOOT resistance board connection line to protect the ECU. Customers can use it with J2534 devices and PCMFLash software.

Feedback:
It works with Autel MaxiIM IM608 II, we already test with CAS1 Key.
I can use series and parallel connections to get the resistance I want.
If you’re looking for a round resistor, getting one is impossible. I still have to buy resistors.
If the resistor is not connected, the data may not be read or the data may be lost.

Features:

1. ECU dedicated connection terminal.

2. Support manual ignition power control

3. The ECU interface cable is labeled

4. Support ECU conversion to OBD2 mode to read and write data

5. Support RESET, BOOT, CNF1, GPT1, GPT2, 5V, 3.3V, VPP, GND.

6. Support PCMFlash automatic control of ignition power supply

7. Support ECU opening BOOT method to read and write data

8. CANbus is equipped with a switch to freely select the 120Ω resistor

9. Support GPT to read and write data without disassembling the ECU.

10. Equipped with BOOT resistance board connecting cable [anti-lost resistor design]

Functions:

Diagnostic function supports standard OBD2 protocol equipment.

Supports ECU reading and writing data, and supports J2534 devices.

Only Scanmatik 2 PRO for PCMflash allows to form GPT1, GPT2 signalsnecessary to work with Module 71.

Other devices Scanmatik OpenPort 2.0, Mongoose JLR, MongoosePro JLR,

Teradyne GNA600 (VCM 1), Mazda VCM 2 supports OBD2 or BOOT 53 mode to read and write ECU data.

Connection Method of GODIAG ECU GPT Boot AD programming adapter, J2534 deviceand PCMFlash dongle software.

J2534 device	connection method	PCMFlash dongle software	advantages
			easy, convenient and save money
			Convenient to observe communication status, current and voltage and other working status

Comparison List:

Items
GPT	√	√	√	√
BOOT	√	√	√	√
CNF1	√	X	X	X
Compatible with J2534 devices	√	√	X	X
BOOT resistance board	√	X	X	X
Dedicated ECU terminal	√	X	X	X
Power ignition manual /automatic switch	√	√	X	X
CANbus freely select the 120Ω	√	Fixed 120Ω	X	Fixed 120Ω
5V 3.3V GND CNF1	√	X	X	X

Package Includes:

1pc x GODIAG ECU GPT Boot AD Programming Adapter
1pc x OBD2 to DB25 Cable
8pcs xSoft Silicone Wires